Home builders in Latrobe
Latrobe · Tasmanian Planning Scheme · North West Coast Tasmania Regional town
- Council
- Latrobe
- Planning scheme
- Tasmanian Planning Scheme
- Overlays mapped here
- Natural Assets Code · Landslip Hazard Code · Coastal Inundation Hazard Code · Coastal Erosion Hazard Code · Safeguarding of Airports Code · Electricity Transmission Infrastructure Protection Code · Local Historical Heritage Code · Bushfire-prone Areas Code · Scenic Protection Code · Flood-prone Hazard Areas Code · Attenuation Code · Specific Area Plan
- Residential zones mapped
- General Residential
Rural Living - Bushfire-prone land
- Mapped in this suburb
- Heritage codes mapped
- 2
- Landslip hazard
- Low landslip hazard band · Medium landslip hazard band
Planning data from theLIST (Land Information System Tasmania) (CC BY 3.0 AU), read 2026-09-14. Suburb-level, not a report on your block — check your address on iPlan.
Builders serving Latrobe
None yet — tell us what you're building and we'll go and find one.
What building in Latrobe actually involves
Latrobe is 64 km² and carries twelve codes — the most of any Tasmanian suburb we have mapped — including one that appears nowhere else on this site: the Attenuation Code.
The Attenuation Code is about what is next door
It applies around activities that generate off-site impacts — noise, odour, dust — and it constrains sensitive uses, including houses, within the mapped distance. On the edge of a working rural town that is a real and easily missed constraint, and it is mapped to specific land rather than to the suburb.
Twelve codes over sixty-four square kilometres
Coastal Inundation, Coastal Erosion, Flood-prone Areas, Landslip, Bushfire-prone Areas, Scenic Protection, Natural Assets, Safeguarding of Airports, Electricity Transmission and Local Historical Heritage are all mapped as well. Two Latrobe addresses can face entirely different assessment paths.
Two zones only
General Residential and Rural Living. Which one applies decides the lot size, the services question and the kind of house that suits — and across 64 km² it is not inferable from the town name.
What to ask a builder
Ask which codes touch the block, and specifically whether the Attenuation Code does. Ask whether the lot is General Residential or Rural Living. And ask for a recent Latrobe Council approval.
Local landmarks in Latrobe
- Atkinson Park
- Bells Parade
- Bosworth Park
- Dolly Dalrymple Reserve
- Henry Somerset Reserve
- St Georges Park
Named plans that apply in Latrobe
Specific Area Plans covering land here, as the authority names them. Which one governs your lot decides its density, layout and staging — check the address before you assume the zone alone sets the rules.
- Bellfield Industrial Specific Area Plan
A Specific Area Plan overrides parts of the standard zone provisions for the area it covers.
Source: iplan.tas.gov.au, read 2026-09-14.
Questions about building in Latrobe
What is the Attenuation Code?
A control around activities that generate off-site impacts such as noise, odour or dust. It constrains sensitive uses, including houses, within the mapped distance. Latrobe is the only suburb we have published where it is mapped.
Why does Latrobe carry so many codes?
Twelve are mapped, because the suburb is 64 km² and includes coastline, flood-prone flats, sloping ground, a historic town centre and rural land. Which ones reach your block is an address question.
What zone is Latrobe?
General Residential and Rural Living. Which one applies decides the lot size, the services question and the kind of house that suits the block.
Is Latrobe bushfire-prone?
The Bushfire-prone Areas Code is mapped. A block inside it needs a Bushfire Attack Level assessment, and the rating drives construction materials and cost.
Does Latrobe flood?
Flood-prone Hazard Areas, Coastal Inundation Hazard and Coastal Erosion Hazard are all mapped. Where they apply they can set a floor level, which changes the slab or subfloor.